IPX5/IPX6 hose nozzle IEC60529 Figure 6@防喷水试验装置

防喷水试验装置是依据标准IEC60529 IPX5/6、GB4208 IPX5/6等标准的相关条款要求制作，用于对检验具有防淋雨功能的器具或电器的防水性能进行测试。喷头采用黄铜材质制成，适用于可能受到各种冲水或猛烈海浪影响的产品。

The water spray test apparatus is designed in accordance with the relevant requirements of standards such as IEC60529 IPX5/6 and GB4208 IPX5/6. It is used to test the waterproof performance of appliances or electrical equipment that require protection against splashing water. The nozzle is made of brass and is suitable for products that may be exposed to various water jets or heavy wave conditions.

功能参数：

1、 适用于进行产品的IPX5、IPX6测试。

2、 孔径：ф6.3mm（IPX5）、ф12.5mm（IPX6）。

3、 IPX5、IPX6喷嘴螺纹联接、快速更换。

4、黄铜材质。

5、 水流量：12.5±0.625L/min(IPX5)、100±5L/min(IPX6)

6、压力表:0~2.5MPa

7、 试验时间：不小于1min/m2(但不小于3分钟)、用户设定时间（控制系统控制）。

8、 喷嘴距外壳距离：2.5-3m(试验人员控制)

9、IPX5:需提供水流速率为大于12.5L/min±5%，IPX6需提供水流速率为大于100L/min±5%干净、无杂质的清水

Functional Parameters:

Suitable for IPX5 and IPX6 testing of products.

Nozzle aperture: ф6.3mm (IPX5), ф12.5mm (IPX6).

IPX5 and IPX6 nozzles feature threaded connections for quick replacement.

Made of brass.

Water flow rate: 12.5±0.625L/min (IPX5), 100±5L/min (IPX6).

Pressure gauge: 0~2.5MPa.

Test duration: no less than 1 minute per square meter (but not less than 3 minutes total), with user-defined settings (controlled by the control system).

Distance from nozzle to enclosure: 2.5-3m (controlled by the operator).

Requires clean, impurity-free fresh water with a flow rate greater than 12.5L/min ±5% for IPX5 and greater than 100L/min ±5% for IPX6.